Smart and energy saving solar PIR sensor control LED lights with red backlight, for extra security.
Automatic switching on when at dusk or night, and switch off in day, auto charging under sun.
Detecting people approaching and automatic power off when detecting people left.
The lamp can illuminate the way for you at night, also a safeguard tool which can threaten bad guys by sudden burst.
It works in a 120 degree angle and detects motion up to 2~3 meters away.
With poly-silicone solar panel, can convert solar energy into electricity, no need of outside power or cable, energy efficiency and environmental protection.
We will send you stickers and screws, which will facilitate your installation.
Simple classic slope design, ABS shell, it is not only a lamp, but also an adornment without increasing electricity bill.
The L shape lamp, embedded 4 red LED as rear light, will illuminate with front beads together, very cool if you install it on a window or glass wall.
It is widely used for illumination in outdoor, courtyard, balcony, wall, villa, walkway, driveway, street, garden, plaza, entrance, etc.
Specifications
Material: Safe ABS
Shell color: Black/White/Silver/Golden
Sensor sensitivity: 2~3m / 120 degrees
Built-in lithium battery: 3.7V, 18650 cells
Color temperature: Cool white, 6000 - 6500K
Night sensor: Less than 10Lux
Charging time: 6~8 hours
Waterproof: YES, IP65
Lightning mode: Off / dim / bright light
|
Style |
L shape |
|
Chip |
SMD2835 |
|
Beads |
24pcs |
|
Wattage |
2.5W |
|
Luminous |
450lm |
|
Size(about) |
3.94x4.64x3.54x5.39" |
|
Mode 1 |
Switch on when it's dark, keep dim when no people, bright light when detect motion, delay 15s, then shift to dim light. |
|
Mode 2 |
Switch on when it's dark, keep bright when detect motion, delay 15s, then off. |
|
Mode 3 |
Switch on when it's dark, then keep dim light all the way, until the battery run out of power. |
Attention
1.Keep the device away from fire.
2.Please fully charged the device before first use, for about 8~10 hours.
3.If there is no good sunlight in 3 months, the battery may be out of power, so you have to charge it by bright sunlight.
4. Long poke(2-3S) to switch on, then short poke to shift modes, and the LED will flash once when shifting modes, will switch off after mode 3.
Package Included
|
1 set |
1 X Solar Motion Sensor Lamp |
|
1 X Switch Pin |
|
|
2 X Mount Screws |
|
|
2 X Expansion Pillar-hinge |
|
|
1 X User Manual |